22
1
(A)
(A)
2
(A)
(A
)
+1/2”
+1
/2
”
(1.3 cm)
(1.
3 c
m)
(A)
+1/2”
(1.3 cm)
3-5/8
”
3-5
/8”
(9.2
cm)
(9.2
cm
)
3-5/8
”
(9.2
cm)
Measure from floor to bottom
of the anit-tip opening located on the back of range.
This will be measurement (A).
Locate anti-tip bracket on rear wall with the top left corner at
measurement (A) plus 1/2” (1.3 cm) from the floor and 3-5/8” (9.2 cm)
from where the right side of range (facing range) is to be located.
3
Mark and drill holes where bracket
will be located.
Anti-tip Device Installation - Wall Mount
WARNING
Tipping hazard.
To reduce the risk of the appliance
tipping, it must be secured by a
properly installed anti-tip bracket(s).
To make sure the bracket has been
installed properly, look behind the
range with a flashlight to verify
proper installation engaged in the
rear top left corner of the range.
• THIS RANGE CAN TIP.
• INJURIES TO PERSONS CAN RESULT.
• INSTALL ANTI-TIP DEVICE PACKED
WITH RANGE.
• SEE INSTALLATION INSTRUCTIONS.
1
2
4
Attach bracket with
mounting hardware provided.