Viking Electronics PSA-TB-IP Quick Start Manual Download Page 2

4.0  Features Overview

Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries 
assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.

See the Product Manual for complete installation and programming instructions. 

Questions? Call Viking Product Support:  715-386-8666

PSA-TB-IP Quick Start Guide

ZF304315 REV 1

Connect to an optional

 Momentary Switch 

to initiate outbound calls or answer 
inbound ringing SIP calls (not included)

Trigger

Input

Microphone:

  Omni-directional microphone with 

doubleback tape for mounting behind speaker grille.

Front View 

MAC Address Label: 

The MAC 

address is a unique 12 digit number 
used by routers to send network 
traffic to the correct IP address.

Side Views 

Reset Switch: 

See page 9, section D and E.

PoE LAN Port 10/100, PoE Class 3 (<13 Watts): 

Connect  to  your  LAN  via  RJ45  plug  and  CAT5  or 
greater twisted pair wire.

Yellow Network Status LED: 

Lights steady to indicate 

power and data link. Blinks to indicate network activity.

Green Unit Status LED

40AE

Speaker
Out 

30AE

25AE

35AE

300AE

Volume Control

30AE

See 

MANAGING POWER LOSS

 section on page 2 of Product Manual.

Red Call/Status LED:

  Flashes 

during dialing, then lights steady 
when answered.

MAC:

18E80FXXXXXX

asdesaxtff

Drive up to (6) Analog Speakers

(Viking Models shown, not included, see DOD 497 and 498)

Reviews: