19
ViGOR GmbH
•
;
Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY
[
+49 (0) 21 91 / 97 95 •
\
+49 (0) 21 91 / 97 96 00 •
]
^
vigor-equipment.com
1. Affix 4 Phillips-Recess screws M6 A as shown below (
6
,
7
,
8
) on the top of the
support bracket. Do not tighten the Phillips-Recess screws M6 A completely. Tighten
until approximately 3 to 5 screw threads remain, in order to affix the cabinet unit
5
later.
2. Raise and attach the wall cabinet
5
to the Phillips-Recess screws M6 A
on the support bracket (
6
,
7
,
8
).
3. Fully tighten the upper screws and affix the remaining 4 Phillips-Recess screws M6 A from
the inside of the cabinet unit
5
to the support bracket (
6
,
7
,
8
) in order to secure the
structure.
Alternatively, single VIGOR cabinet
elements can be connected with the
help of the connection plate set
V6000-040/4.
1. Attach the perforated tool panel
4
to the support bracket as shown in the diagram.
Step 2
Note
