background image

ViGOR GmbH

 • 

;

 Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY

[

 +49 (0) 21 91 / 97 95 • 

\

 +49 (0) 21 91 / 97 96 00 • 

]

 [email protected] • 

^

 vigor-equipment.com 

 

Application Note

Measuring Cable Set

V4326

This is a multiple pairs of terminals for car factory. It contains most kinds of female and male terminals for 

Weather-Pack, Metri-Pack, and Micro-Pack connectors. It is convenient for technician to carry and arrange. 

With banana connectors on one end of the wire, technician can easily connect care wires and test equip-

ment through these sets of terminals.

With this set of connectors, technician can save time to search for different connectors and check the car 

problem rapidly and accurately.

Operation and Application:

1.  During the components testing, user do not have to clear the insulator; user can test the component

  from the back of the components, which will be helpful to reduce the chance of increasing resistance

  following the oxidation.
2.  The banana connectors within this kit is satisfy with any multi-meters, which will be helpful for user to 

  switching between testing devices.
3.  During the current measurement, instead of cutting off the wore, user can use the testing terminal and

  extension wire to achieve the same purpose.
4.  Variable resistor can simulate the signal from the sensor to the computer, which will be helpful 

  during the diagnosis.
5.  LED stroboscope can monitor the performance of Hall components, photo signals, valve signal…etc.
6.  SRS connector can emulate the air bag during the diagnosis.
7.  The testing terminal within this kit has satisfy all Europe, US and Japan automobile terminals.

Reviews: