V3551
I
. 05.2014/
∞
Ho/330
Product Name:
Hot Sapler for Pastic Repair-Set
Article No.:
V3551
We declare that the product which this declaration relates is in conformity with the requirement of the standards of
the European Directive EMC (2004/108/EG). The product is conform futhermore to the requirements of the standards
of the Low Voltage Directive (2006/95/EG).
Furthermore, we declare that the a/m article is in conformity with the requirements of the following standards:
EN 55022:2010 (CISPR 22:2008); EN 55024:2010; EN 61000-3-2:2006 + A1:2009 + A2:2009; EN 61000-3-3:2008; EN 61000-4-2:2009;
EN 61000-4-3:2006 + A1:2008 + A2:2010; EN 61000-4-4:2012; EN 61000-4-5:2006; EN 61000-4-6:2009; EN 61000-4-8:2010; EN 61000-
4-11:2004; IEC 60950-1 :2005+A1; FCC Part 15, Subpart B, Claas B; ICES-003 :2012 Issued 5, Class B; ANSI C63.4-2009; EN 55022:
2010+AC:2011, Class B; CISPR 22: 2008, Class B; AS/NZS CISPR 22: 2009+A1 : 20010, Class B; EN 61000-3-2: 2006+A1 : 2009+A2: 2009;
EN 61000-3-3: 2008; EN 55024: 2010; IEC 61000-4-2: 2008 ED.2.0; IEC 61000-4-3: 2010 ED.3.2; IEC 61000-4-4: 2010 ED.3.0; IEC 61000-4-5:
2005 ED.2.0; IEC 61000-4-6: 2008 ED.3.0; IEC 61000-4-8: 2009 ED.2.0; IEC 61000-4-11: 2004 ED.2.0
Person authorized to compile the technical
fi
le:
Sandra Müller, Tel.: +49 (0) 2191 792 319
Datum:
06.03.2014
Hermann J. ZERVER
ViGOR GmbH • Am Langen Siepen 13 - 15 • 42857 Remscheid
[email protected] • www.vigor-equipment.com
Declaration of Conformity
Special warnings and precaution for use:
This product has specially been
developed for plastic repairing!
CAUTION!
For your security, please read this manual carefully!
•
Electrical energy can cause serious injuries.
In order to avoid electrical shock, injuries or
fi
re the following safety instructions
have to be observed and respected:
• Check all components before use. Please make sure that lead and housing are not
damaged. Tools that have been dropped or that are damaged, must be checked by quali
fi
ed
personnel before restarting operation.
• Service and repair work should be carried out by quali
fi
ed technical personnel only.
In order to ensure the working reliability in the long term, always use original spare parts.
• The staple inserted in the electrodes during the soldering phase, the temperature can rise to over 500°C!
• Pay close attention; an incorrect handling can cause serious burns and initiate a
fi
re!
• Use appropriate heat resistance gloves during the work time!
• Before introduce the staple, be sure that the electrodes are cold!
• Do not touch the staple during the warm-up phase!
• Do not use in presence of
fl
ammable liquids!
• Do not use with wet hands!
• Do not use in environment wet!
• Restrict unauthorized access Make sure that no one, in particular children,
can get near hot plastic stapler without your permission.
1. Insert the power cord and turn
on power for using.
2. LED light for temperature
indicator.
3. Insert the staple and push
control switch for repair.
4. After three seconds, push
down the staple for repair.