ViGOR GmbH
•
}
10 04 61 • D-42804 Remscheid • Germany
[
+49 (0) 21 91 / 97 95 •
\
+49 (0) 21 91 / 97 96 00 •
]
^
vigor-equipment.com
Warning
Electrical energy can cause serious injuries.
In order to avoid electrical shock, injuries or fi
re the following safety instructions have to be
observed and respected:
• Please make sure that lead and housing are
not damaged. Lights and charging stations that
have been dropped or that are damaged,
must be checked by qualified personnel before
restarting operation.
• When laying the power supply lead, please
make sure that it does not come into contact
with hot or sharp parts and that it cannot be
damaged in another way. The lead is to be laid
in such a way that it does not constitute a risk of
stumbling.
• 3 Watt LED Work Light must not be exposed to
water or other liquids.
Dangerous voltage discharge may occur.
• Service and repair work should be carried out
by qualified technical personnel only. In order
to ensure the working reliability in the long term,
always use original spare parts.
• The 3 Watt LED Work Light must not be disas-
sembled. Inappropriate assembly can lead to a
reduction of the functionality, to fi re, to electrical
shocks and/or to injury.
• Do not remove any safety devices.
• Never look directly into the light, the light intensity
is strong enough to cause eye injuries.
• If an extension cord is necessary, it must be
sufficiently dimensioned for the charging station.
Cables which are not appropriate for the neces-
sary amperage may overheat.
• When recharging, both the 3 Watt LED Work
Light and the charging station slightly warm up
which does not reduce their functionality. When
working with the work light, appropriate caution
is required.
• Only use the 3 Watt LED Work Light within the pre-
scribed places, and governed under the current
regulations relating to the working environment
and to electrical systems.
Disposal
For disposal the light and the Lithium-Ion
battery must be supplied to the respective
public recycling system.
Warranty
Any deviation from the intended use is not allowed
and will be considered as improper use. Improper
use means:
• Products that have been modified or repaired by
persons not belonging to ViGOR-Equipment.
• Misuse, improper handling, negligence and
any deviation from the intended use or from
the instructions and specifications of ViGOR-
Equipment or
• Use in combination with any other product,
device, component or system that is damaged,
may cause malfunction or is not intended for use
in combination with this tool.
EC Declaration of Conformity
Product: 3x1 Watt LED Work Light
Article No.: ViGOR V2668
We declare that the above designated product is
in compliance with the following European Com-
munity Directives: Electromagnetic Compatibility
2004/108/EC and Low Voltage Directive 2006/95/
EC.
Furthermore we declare that the product is in com-
pliance with the following standards:
DIN EN 55015:2006+A1:2007+A2:2009; DIN EN
61547:2009; DIN EN 61000-3-2:2006+A2:2009
DIN EN 61000-3-3:2008; DIN EN 60598-
1:2008+A11:2009; DIN EN 60529:1991+A1:2000
Date: April 16, 2012
Hermann J. ZERVER
HAZET-WERK Hermann Zerver GmbH & Co. KG
Güldenwerther Bahnhofstr. 25-29
42857 Remscheid
Germany
V 2668 AH-
I
05.12/∞ 330
