FIG.5
9
MODEL VG06071
IMPORTANT
!
WAIT 24 HOURS BEFORE USING SHOWER
DO NOT ALLOW WATER TO DIRECTLY HIT DOOR SEAL STRIPS
E. INSTALLING THE DOOR BOTTOM SEAL STRIP
1.
Clean the door glass panel (#1) edges where the door bottom seal strip (#4) is to be installed
with rubbing alcohol.
2.
The door bottom seal strip (#4) is cut already to the proper size.
3.
Verify that the lip of the seal strip faces toward the inside of the shower cabin before seal strip
installation.
4.
Install the seal strip according to the diagram. [SEE FIG.6]
NOTE: If the seal strips are not flat, use a hair dryer to apply minimal heat and press the seal strip back into
position.
4
FIG.6
3
4
1
5
1
D. INSTALLING THE HANDLE
1.
Unscrew the handle holders from the handle assembly (#5).
2.
Place the handle to the position on the door. Place plastic washers (supplied) on each side of
the door. [SEE FIG.12]
3.
Tighten the handle nuts from inside the shower.
TOP VIEW
