background image

5

TROUBLESHOOTING

PROBLEM

POTENTIAL CAUSE

CORRECTIVE ACTION

1 - Leaks from handle

2 - Insufficient flow rate

3 - Leak at connection points

4 - Loose faucet body

PARTS LIST - 

For any parts needed but not shown, please contact Vigo Technical Support

PART

PART #

FINISH

SUPPLY DATE INDICATOR (INTERNAL USE ONLY)

1.A - Cartridge unseated
1.B - Cartridge defective

2.A - Dirty aerator
2.B - Clog in supply hose / line

3.A - Sprayer hose not tight
3.B - Flexible hose leaking at body or connection point

4. - Metal nut became loose

3.A - Remove sprayer and check integrity of the black washer.
Make sure the washer is seated properly and retighten.

2.B - Remove sprayer or supply line and flush lines

2.A - Remove and soak / clean with a non abrasive agent (i.e.
vinegar).

1.B - Contact Vigo Technical Support for replacement.

1.A - Remove cartridge from housing, wash thoroughly with hot

water and reseat in housing.

3.B - Tighten hoses. If this does not resolve the issue, remove
the flexible hose and rethread, checking to make sure the
connection is secure. Make sure to use pipe tape.

4. - From under the counter, use an adjustable wrench and
tighten the metal nut to the hollow pipe. Make sure the faucet is

perpendicular to the counter.

W

CH, ST

74007

Sprayer

W

Handle

Handle Lever

Sedal Cartridge

Metal braided Hose

Pull out Hose (black nylon)

74019

W

CH, ST

W
W

78061A
78061B

W

CH, ST

74040

-

74020

-

5 - Sprayer button stops working

5.A - Debris in aerator
5.B - Wear and tear on button

5.A - Remove and clean aerator.
5.B - Contact Vigo Technical Support for replacement.

NSF / ANSI 61

CH, ST

Sprayer Washer

W

74008

-

Black Washer with Screen

W

74010

-

Flow Restrictor

W

78093W

-

Summary of Contents for VG02002







Reviews: