3.3. Switching on procedure
•
Do not switch on the preamplifier power supply until ALL elements of the IR detection kit are properly connec-
ted with the proper cables.
•
Before starting the measurements make sure the load resistance is valid. The VPXC-xxS output should be
terminated by 50Ω or 1MΩ resistance depending on the bandwidth and is given in the test data provided on
the module.
•
Do not manipulate any connectors on the active IR kit – this may introduce additional noise to the system or
can cause severe damages due to electrostatic discharges.
129/133 Poznanska St., 05-850 Ozarow Mazowiecki, Poland; tel. +48 22 733 54 20; fax +48 22 733 54 26; e-mail:
7
Please note: the information contained in this document is subject to change without further notification. VIGO System reserves the right to alter the performance and any resulting specifications.VS-
11-08-16
MB
