manualshive.com logo in svg

Viglen Vig760S, Manual, Page: 14 / 60

Share
Download
Viglen Vig760S Manual Download Page 14

14 
V1.0                                   Vig760S Motherboard Manual 

2.3.11 

 (11)

 Clear RTC RAM (2-pin CLRTC) 

This header allows you to clear the CMOS RTC RAM data of the system setup 
information such as date, time, and system passwords 
 
To erase the RTC RAM: 

1  Turn OFF the computer and unplug the power cord.  
2  Use a metal object such as a screwdriver to short the two 

pins. 

3  Plug the power cord and turn ON the computer. 
4  Hold down the <Del> key during the boot process and enter 

BIOS setup to re-enter data 

 

2.3.12 

 (12)

 Front panel audio connector (10-1 pin AAFP) 

This connector is for a chassis-mounted front panel audio I/O module that supports 
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel 
audio I/O module cable to this connector. 
 

NOTE: We recommend that you connect a high-definition front panel 
audio module to this connector to avail of the motherboard’s high-
definition audio capability. 

If you want to connect a high-definition front panel audio module to 
this connector, set the Front Panel Type item in the BIOS setup to 
[HD Audio]. If you want to connect an AC’97 front panel audio module 
to this connector, set the item to [AC97]. By default, this connector is 
set to [HD Audio 

 

2.3.13  (1

3)

 Serial port connector (10-1 pin COM1) 

Connect the serial port module cable to this connector, then install the module to a slot 
opening at the back of the system chassis. 
 

2.3.14 

 (14)

 PM connector (14-1 pin TPM) 

Connect a Trusted Platform Module (TPM) system to this connector to enhance 
network security, protect digital identities, and ensure platform integrity. 
 

 

 

Summary of Contents for Vig760S





























































Reviews:

No comments