XMA Limited
,
VHQ, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ
Tel:
01727 201 850
| Fax:
01727 201858
| Email:
| Web:
www.xma.co.uk
BIOS settings for Windows 7 and Windows 10 O/S
Windows UEFI mode for Windows 8.1/10
Vig830s system configured with Windows 8/8.1 will have following default BIOS settings. If
you wish to downgrade to Windows 7 then BIOS must be configured to Non-UEFI mode.
Boot\CSM (Compatibility Support module)
Launch CSM
[Enabled]
Boot Device Control
[UEFI Only]
Boot from Network Devices
[UEFI drivers first]
Boot from Storage Devices
[UEFI drivers first]
Boot from PCI-E/PCI Expansion Devices
[UEFI drivers first]
Boot\Secure Boot Menu
OS Type [
Windows UEFI mode
]
Note
Please ensure the changes of the following settings are performed by personnel with some previous
experience/knowledge of altering BIOS settings.
Enabling Windows UEFI mode for Windows 8/8.1 & 10 Operating System
1.
From the BIOS main menu bar select ‘
Advanced’
2. Navigate to the
Boot
sub menu
3.
Select
CSM (Compatibility Support Module)
Figure 6
