V1.0 Vig710W Motherboard Manual
40
Windows 8/8.1 BIOS Setting
System configured with Windows 8 will have following default BIOS settings. It is strongly
recommended that these BIOS settings are not disabled for a Windows 8 system.
Fast BOOT
[Enabled]
UEFI Boot
[Enabled]
Secure Boot
[Enabled]
To configure Windows 7 on this system the BIOS settings must be changed to boot into
Legacy BIOS mode. Above BIOS settings should be changed to
[Disabled]
Note
Please ensure the changes of the following settings are performed by personnel with some
previous experience/knowledge of altering BIOS settings
.
Accessing BIOS Setup
To access the BIOS, when the system is powered on repeatedly press the [DEL] key to
access BIOS setup screen once the Windows 8 setup is complete to re-access the BIOS
you will need to power down the system and wait 20 seconds before powering up the
system; on power on Press the {DEL} key to access BIOS setup.
Enabling/Disabling Windows 8 Features
1.
From the BIOS main
menu select
the
‘Boot’ tab.
Figure 26:
Main menu
2.
In the ‘Boot’ tab
scroll down
the options to ‘Fast Boot’ and
select
this option.
Set
the ‘Fast Boot’ option to ‘Enabled’.
