V1.0 Vig646M V2 Motherboard Manual
8
width can vary from one channel to the other. If different DIMM speeds are used
between channels, the slowest memory timing will be used.
Graphics Subsystem
The board supports system graphics through either Intel Graphics Technology or a
PCI Express 2.0 x1 add-in graphics card.
Integrated Graphics
The board supports integrated graphics through the Intel® Flexible Display Interface
(Intel® FDI) for processors with Intel Graphics Technology.
NOTE:
If using a processor with integrated graphics, the board will support only two of
the integrated graphics interfaces simultaneously: VGA, DVI-D, HDMI. Also, during the
Power On Self Test (POST), the board will not output to the HDMI if VGA and DVI-D is
used concurrently with HDMI.
Analog Display (VGA)
The VGA port supports analog displays. The maximum supported resolution is 2048 x
1536 (QXGA) at a 75 Hz refresh rate. The VGA port is enabled for POST whenever a
monitor is attached, regardless of the DVI-D connector status.
Digital Visual Interface (DVI-D)
The DVI-D port supports only digital DVI displays. The maximum supported resolution is
2048 x 1536 at 75 Hz refresh (QXGA). The DVI-D port is compliant with the DVI 1.0
specification.
High-Definition Multimedia Interface (HDMI)
The HDMI port supports standard, enhanced, or high-definition video, plus multichannel
digital audio on a single cable. It is compatible with all ATSC and DVB HDTV standards
and supports 8 full range channels at 24-bit/96kHz audio of lossless audio formats such
as Dolby TrueHD or DTS HD Master Audio. The maximum supported resolution is 1920
x 1200 at 60 Hz refresh (WUXGA).
The HDMI port is compliant with the HDMI 1.3 specification.
