Viglen VIG520S, Manual

Page: 16 / 86

15 of 85
The time, date, and CMOS values can be specified in the Setup program. The
CMOS values can be returned to their defaults by using the Setup program.
An external coin-cell (CR 2032) battery powers the real-time clock and CMOS
memory. When the computer is not plugged into a wall socket, the battery has an
estimated life of three years. When the computer is plugged in, the 3.3-V standby
current from the power supply extends the life of the battery. The clock is accurate
to
±
13 minutes/year at 25 ºC with 3.3 V applied.
I/O Interface Controller
MuTIOL® Delivering 533MB/s Bandwidth
- Proprietary Interconnect between SiS north bridge and SiS962
- Bi-Directional 16-bit Data Bus at 266MHz Operating Frequency
USB 2.0/1.1 Host Controller
- One EHCI USB 2.0 Controller and 3 OHCI USB 1.1 Controllers
- Support Total 6 USB 2.0/1.1 Ports
- Support USB 2.0 High-Speed Device @480 Mb/s Transfer Rates
Fast Ethernet/Home Networking Controller with MII Interface
- Support 10/100Mb Fast Ethernet or 1/10Mb HomePNA 2.0 with External PHY
Audio/Modem Controllers with AC'97 Interface
- AC'97 v2.2 Compliant
- Support 6 Channels of AC'97 Speakers Out and v.90 HSP Modem
Advanced Power Management
- ACPI 1.0b and APM 1.2 Compliant
Dual IDE Channels with ATA 133/100/66
Support Up to 6 PCI Masters
LPC 1.0 Interface
Integrated RTC
Integrated Keyboard/PS2 Mouse Controller
PC2001 Compliant
By default, the I/O controller interfaces are automatically configured during boot up.
The I/O controller can also be manually configured in the Setup program
.
Parallel Port
The connector for the multimode bi-directional parallel port is a 25-pin D-Sub
connector located on the back panel. In the Setup program, the parallel port can be
configured for the following:
•
Compatible (standard mode).
•
Bi-directional (PS/2 compatible).
•
Extended Parallel Port (EPP).
•
Enhanced Capabilities Port (ECP).