Vig451J Motherboard Manual
82
User Password on Boot
Specifies whether a user password must be entered before the boot process
1. On Every Boot
–
Entry of a user password is required before every boot
process
2. Disabled
–
the system starts without requiring the entry of a user password
o
If the administrator password and the user password have been assigned and
the setting Disabled has been chosen for this item, simply press Enter to get
USER access to the BIOS Setup. In this case the user password does not have
to be entered
Cabinet Monitoring
Specifies whether opening of the casing should be monitored
1. Disabled
–
The system continues to operate normally even if the casing has
been opened
2. Enabled
–
If the casing has been opened, then the boot process is
suspended until the BIOS Setup is called. If the BIOS Setup is protected with
a password, then this must be entered. An SMBIOS event log entry will be
generated
Skip Password on WOL
Specifies whether a user password will be skipped or must be entered during a
system boot via Wake on LAN
1. Disabled
–
The user password must be entered via using the keyboard
during the system boot.
2. Enabled
–
The user password is deactivated during the system boot with
Wake On LAN
Flash Write
Supplies the system BIOS with write protection
1. Disabled
–
The system BIOS cannot be written. A flash BIOS update is not
possible
2. Enabled
–
The system BIOS can be written. A flash BIOS update is possible
