Omnino HS Quick Start Guide – Ver 1.0
21
I/O Ports and the Interface Panel
The communication between your Omnino HS and other devices is performed via
I/O (Input/Output) interfaces or ‘ports’. You will probably never use all the ports on
the back of your computer, but a wide selection is available for maximum flexibility.
All of the industry standard ports are available, and they are individually coloured
and labelled with icons for simple installation of peripherals.
This section of the manual will explain the different uses of each port, and a little on
the peripheral types.
Most of the I/O ports on the back of your Omnino HS have been conveniently
grouped into one area. This region of the PC is known as the ‘Interface Panel’.
Omnino HS
- Interface Panel
Note:
Your system may be configured slightly differently to the diagram above.
The Games, Speaker, Line-in and Mic-in ports maybe on a separate add-in card
– or you may not have audio at all in your configuration. On some systems, the
second serial port is actually the VGA port instead (to connect the PC to the
monitor). Please ensure you understand the configuration of your Viglen
system before attempting to install it.
Your Interface Panel may have a slightly different layout to the diagram above.
Always use the colours and symbols to locate the correct I/O ports.
