Vigitron MaxiiPower Vi2208A, User Manual

Page: 24 / 46

24
1.11.2 ILIM/ICUT
Configuration
1.11.3 System
Configuration
1.11.4 Chip ID
1.11.5 SW Version
For Normal Mode, the power budgeted is 16.2W:

For High Power Mode (802.3at-Class 4) the power budgeted is based on
ILIM/ICUT selected value.
o
For ILIM/ICUT – 504/465 mA, the power budgeted is 22.5W.
o
For ILIM/ICUT – 563/545 mA, the power budgeted is 26.5W.
o
For ILIM/ICUT – 850/625 mA, the power budgeted is 31.6W.
o
For ILIM/ICUT – 850/725 mA, the power budgeted is 37.0W.

These limits will help to provide the necessary power for your system and
prevents run away shorting and potential damage from occurring.

Static /wo Priority: Same as above except that port priority of the port is
ignored.

Static /wo Priority: Power is budgeted statically based on selected violation
type.
o
If violation type is “ Class Based ”, then maximum permissible
power for that class is budgeted.
o
If violation type is “ User Defined ”, then the configured user-
defined limit is budgeted.
o
If violation type is “ None ”, then budgeted power is based on port
mode.
For
Normal Mode, the power budgeted is 16.2W:

For High Power Mode, the power budgeted is based on ILIM/ICUT selected
value.

For ILIM/ICUT – 504/465 mA, the power budgeted is 22.5W.

For ILIM/ICUT – 563/545 mA, the power budgeted is 26.5W.

For ILIM/ICUT – 850/625 mA, the power budgeted is 31.6W.

For ILIM/ICUT – 850/725 mA, the power budgeted is 37.0W.

Dynamic /w Priority: The power is budgeted based on the load and priority
of the port.

Dynamic /wo Priority: The power is budgeted based on the Load.
Set the Current Limit and Current Cut Limit (ILIM/ICUT).
This section displays the status of information about the Midspan.
This shows the current PSE control Chip Revision.
This shows the current running firmware version.