background image

Ethernet Switch/NVR-end Installation 

(cont.)

Limited Lifetime Warranty  

Vigitron, Inc. warrants that all Vigitron products (“Product”), if used in accordance 

with these instructions, will be free of defects in material and workmanship for 

lifetime defined as the duration period of time until product end of life is announced. 

After which, Vigitron will continue to provide warranty services for a period of 3 

years. Period covering valid warranty will be determined by proof of purchase in the 

form of an invoice from an authorized Vigitron dealer.

Warranty will only be provided for as long as the original end user purchaser owns 

the product. Warranty is not transferrable. At Vigitron's option, defective product will 

be repaired, replaced or substituted with a product of equal value. This warranty 

does not apply if, in the judgment of Vigitron, Inc., the Product fails due to damage 

from shipment, handling, storage, accident, abuse or misuse, or if it has been used 

or maintained not conforming to Product manual instructions, has been modified, or 

serial number removed or defaced. Repair by anyone other than Vigitron, Inc. or an 

approved agent will void this warranty. Vigitron, Inc. shall not under any circum-

stances be liable to any person for any incidental, indirect or consequential 

damages, including damages resulting from use or malfunction of the product, loss 

of profits or revenues or costs of replacement goods. The maximum liability of 

Vigitron, Inc. under this warranty is limited to the original purchase price of the 

Product only.

Drawings  

Status LEDs

© Copyright 2022 Vigitron, Inc.

TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205  

7810 Trade Street, Suite 100, San Diego, CA 92121, USA • [email protected] • www.vigitron.com

 

When Vi25XX and Vi2701TX make a connection, the Vi25XX will provide 

power to Vi2701TX and the camera. While the Link LED, Orange for 

100BaseT and Green for 10BaseT, is in a steady state it will indicate 

confirmed connection between extenders.

3- Using Vi2208A/16A (port 1-4) and a Vi2301A or Vi2300A

- Power up the Vi22XXA.

- Connect the RJ45 connector of the Ethernet switch to the 10/100BaseT 

Ethernet port of Vi22XXA using a standard Cat5/6 cable of maximum 328 

feet (100 m) in length.

- Connect an output port (port 1-4) of Vi22XXA to the 10/100BaseT Ethernet 

port of Vi2301A using a short standard Cat5/6 cable.

- Connect one end of the long UTP Cat5/6 cable to the “Extended Ethernet” 

RJ45 connector of Vi2301A.

When Vi22XX, Vi2301A and Vi2701TX make a connection, the Vi22XX will 

provide power to Vi2301A, Vi2701TX and the camera. While the Link LED, 

Orange for 100BaseT and Green for 10BaseT, is in a steady state it will 

indicate confirmed connection between extenders.

LED Name

Color

Status

Function

OFF

Power is OFF

ON

Power is ON

OFF

No Traffic

FLASHING Traffic

GREEN

ON

Connection is OK, 10BaseT Mode

ORANGE

ON

Connection is OK, 100BaseT Mode

OFF

No connection

FLASHING Connection is OK with Traffic

OFF

No connection

ON

Connection is OK

Link                               

(Standard Side)

Power

RED

Traffic                               

(Extended Side)

YELLOW

10/100 BaseT                               

(Extended Side)

Traffic                               

(Standard Side)

GREEN

YELLOW

PoE

GREEN

OFF

ON

PoE Power is On

PoE Power is Off

www.vigitron.com

Made in U.S.A.

10/100

Traffic

10/100Base-T

Traffic

Link

Input Power

52-57VDC

Extended Ethernet

40-56VDC

Output

Vi2701TX

High Power Ethernet and PoE Extender

Power

PoE Out

Right View

Top View

Left View

4.16"

10.56 cm

2.15"

4.3 cm

1.4"

3.5 cm

5.71"

14.5 cm

+

+

5.30"

13.46 cm

10BaseT

100BaseT

Data + 

802.3at PoE 

3,000 ft.

2,100 ft.

3,000 ft.

1,500 ft.

2,100 ft.

Data 

Only

Data Rate

914 m

914 m

457 m

640 m

640 m

Data + 

802.3af PoE 

1,500 ft.

457 m

Data + 

50W PoE 

750 ft.

228 m

750 ft.

228 m

Ordering Information

Data and PoE Distance**

Technical Specifications*

Electrical

Ethernet Interface  Standard 10/100BaseT
Ethernet Rate 

10/100 Mb/s, Auto selectable 

 

Full speed / full duplex at maximum rated distance

UTP** 

100 Ohm +/- 20%, 3,000 feet (914 m) at 10BaseT

 

2,100 feet (640 m) at 100BaseT

Power Input 

Up to 74W 

PoE Output  

56V, @ 60W max. 

Status LEDs 

Power

 

Standard Ethernet: Traffic, Link

 

Extended Ethernet: Traffic, 10/100BaseT  

Connectors 

Ethernet Interface: RJ-45 Connector 

 

Extended Interface: RJ-45 Connector   

 

Input Power: Round DC Jack

 

Output Power: Pluggable Terminal Block

RFC 

2544 TCP/IP Packet Transmission

Compatible with 

IEEE 802.3af PoE, IEEE 802.3at PoE, PoE++ 

RFC 

768 UDP, 2068 HTTP, 793 TCP

 

791 IP, 1783 TFTP, 894 IP over Ethernet 

Regulatory

Safety 

CE, UL, cUL

Environmental RoHS

Environmental

Humidity 

0 to 95%, non-condensing

Temperature  

Operating: -20°C to +75°C

 

Storage: -40°C to +80°C

Mechanical

Dimensions 

1.4 x 2.15 x 4.15 in, 3.5 x 4.3 x 10.4 cm (HxWxL) 

Weight 

0.37 lb, 167 g

Material 

Extruded Aluminum

Accessories

Vi1120, 57VDC 120W power supply (optional)

*Specifications subject to change without notice.

**Distance figures are obtained using in house testing mirroring installations. Factors such as cabling, connections, 

   use of power and environmental conditions may affect actual distances and should be taken into consideration. 

 

 

Vi2701TX

 

 Ethernet and High-Power PoE Extender (Remote Unit)

   

Vi2701RX

 

 Ethernet and High-Power PoE Extender (Local Unit) 

    

Vi2508

       

8-port High-Power Extended UTP Midspan

Vi2516

       

16-port High-Power Extended UTP Midspan

Part No.

Description

          

    

         

          

Ordering Information

Part No.

Description

    

      

Related Products

Reviews: