PART No.
Description
Vi2401 Single port Coax Ethernet Extender
Vi2404 4-port Coax Ethernet Extender
Vi2408 8-port Coax Ethernet Extender, 19”, 1U
Vi2416 16-port Coax Ethernet Extender,19”, 1U
Limited Lifetime Warranty
Vigitron, Inc. warrants that all Vigitron products (“Product”), if used in accordance
with these instructions, will be free of defects in material and workmanship for
lifetime defined as the duration period of time until product end of life is announce-
ment. After which Vigitron will continue to provide warranty services for a period of 3
years. Period covering valid warranty will be determined by proof of purchase in the
form of an invoice from an authorized Vigitron dealer.
Warranty will only be provided for as long as the original end user purchaser owns
the product. Warranty is not transferrable. At Vigitron's option, defective product will
be repaired, replaced or substituted with a product of equal value. This warranty
does not apply if, in the judgment of Vigitron, Inc., the Product fails due to damage
from shipment, handling, storage, accident, abuse or misuse, or if it has been used
or maintained not conforming to Product manual instructions, has been modified, or
serial number removed or defaced. Repair by anyone other than Vigitron, Inc. or an
approved agent will void this warranty. Vigitron, Inc. shall not under any circum-
stances be liable to any person for any incidental, indirect or consequential
damages, including damages resulting from use or malfunction of the product, loss
of profits or revenues or costs of replacement goods. The maximum liability of
Vigitron, Inc. under this warranty is limited to the original purchase price of the
Product only.
Technical Specifications*
RoHS
Drawings
Electrical
Ethernet Interface Standard 10/100BaseT
Ethernet Rate
Dip switch selectable 10/100 Mb/s
Full speed / full duplex at maximum rated distance
Coax (data only)** 75 Ohm, 5000 ft (1,524 m) at 10BaseT
1,800 ft (548 m) at 100BaseT
Coax (with PTP™)** 3,000 ft (914m) at 10 BaseT
1,800 ft (546m) at 100 BaseT
Power Supply
12 VDC / 24 VAC or PoE @150 mA maximum
1.5 W with external power supply
2.5 W using PoE
Connectors
Ethernet Interface: RJ-45 Connector
Extended Interface: Female BNC
Power: IEC380-8 inlet
Environmental
Humidity
0 to 95%, non-condensing
Temperature
Operating: -40°C to +75°C
Storage: -40°C to +85°C
Mechanical
Dimensions
1.15x1.6x3.15 in., 3.0x4.0x8.0 cm (HxWxL)
Weight
0.212 lb, 96 g
Material
Extruded Aluminum
Accessories
12 VDC wall-mount power supply (optional)
*Specifications subject to change without notice.
**Distance figures are obtained using in house testing mirroring installations. Factors such as cabling, connections,
use of power and environmental conditions may affect actual distances and should be taken into consideration.
Ordering Information
www.vigitron.com
3.73"
9.5 cm
1.6"
4 cm
Top View
Ethernet Status LEDs
High Speed Ethernet Extender
over Coax
Vi2401
TM
© Copyright 2012 Vigitron, Inc.
TEL (+1) 858 - 484 -
5209 • FAX (+1) 858
- 484 - 1205
7810 Trade Street, Suite 100, San Diego, CA 92121, USA • [email protected] • www.vigitron.com
Vi2401_Instruction Manual
1.15"
3 cm
Left View
Right View
S1 S2
Extended
Ethernet
On
Off
Off:Slave
On:Master
Off:10BaseT
On:100BaseT
Remote Local
10/100Base-T
Made in U.S.A.
Traffic
Link
12V /24V
10/100Base-T
Made in U.S.A.
Traffic
Link
12V /24V
Traffic
Power
10/100BaseT
LED Name
Color
Status
Function
OFF
Power is OFF
ON
Power is ON
OFF
No Traffic
FLASHING Traffic
GREEN
ON
Connection is OK, 10BaseT Mode
ON
Connection is OK, 100BaseT Mode
OFF
No connection
FLASHING Connection is OK with Traffic
OFF
No connection
ON
Connection is OK
Link
(Standard Side)
Power
RED
Traffic
(Extended Side)
YELLOW
10/100 BaseT
(Extended Side)
Traffic
(Standard Side)
GREEN
YELLOW
RED
Ethernet Switch/NVR-end Installation
(Cont.)
-If the Vi2401 receives power using PoE, make certain the power adaptor is
not connected. The Vi2401 and camera will receive power from the PSE
source.
-If a PSE source such as a PoE network switch is not available, external
power must be provided to the Vi2401.
CAUTION:
If the external power adaptor is connected with no power applied the
Vi2401 will not reference to a PoE source and the system will be
inoperative.
