1. Make sure the battery has been
installed correctly.
2. If you are using it for the first
time, please connect the keypad
to the power adapter.
The LED
indicator will flash while charging
.
and turn solid once the keypad
is fully charged.
3. Remove the battery cover and
turn on the power switch.
ON
Preparation before Use
4
Pair the Keypad with the Main Panel
Scan QR Code
2. Launch the App
.
In the accessory management section, tap [Add Accessory].
3. Scan the QR Code on the keypad.
4. Follow the guideline
s
in
the
App and save the settings.
Pair the RFID Tag with the Main Panel
Scan QR Code
1. Make sure the keypad has been paired with the system.
2. Launch the App
.
In the accessory management section, tap [Add Accessory].
3. Scan the QR Code on the RFID Tag.
4. Follow the guideline
s
in
the
App and save the settings.
been correctly paired.
5
1
.
Reset the keypad until the status bar is flashing 3 colours.
