Vigilantplant TDLS8000, User Manual

Page: 127 / 320

<6. Configuration>
6-12
IM 11Y01D01-01EN
Valve usage Stream 1 Stream 2 Stream 3
Cal/Val usage ○ × ×
2 Streams & Cal/Val usage ○ ○ ×
3 Streams Switching usage ○ ○ ○
Setup menu path:
[HART] “Detailed setup>>I/O condition>>Valve control>>Initial stream”
[YH8000] “Configuration>>I/O>>Valve Control>>Initial”
NOTE
If switching the stream by time elapse is set for the stream number of the initial stream, counting
of the switching time begins from after the power is turned on.
6.9 Other Settings
This section describes various settings other than measurement process settings and the I/O and
alarm settings.
6.9.1 Tag
This is a tag of up to 32 ASCII characters for identifying individual TDLS8000. It is displayed when
you connect to the TDLS8000 from the YH8000. Furthermore, the long tag defined as standard
in HART communication is the same as this tag. From YH8000, Latin-1 character cannot be
inputted on tag.
Setup menu path:
[HART] “Detailed setup>>System>>Long tag”
[YH8000] “Configuration>>System>>Tag”
6.9.2 Date and Time
Set the current date and time. For a detailed description of the setting screen, see “5.3.1
Setting the Date and Time”. Furthermore, it is possible to set the time simultaneously for multiple
connected TDLS8000 only when setting it from the YH8000. For details, see “8.7.3 Setting
the Date and Time on the TDLS8000”.
Setup menu path:
[HART] “Detailed setup>>System>>Date/time>>Set date/time”
[YH8000] “Configuration>>System>>Date&Time”
6.9.3 User Password Setting
Change the user password for when entering the setting screen from the YH8000. Enter the
current password and then enter a new password twice for confirmation.
Setup menu path:
[YH8000] “Configuration>>System>>Password”
3rd Edition: Jun. 10, 2016-00