Vigilantplant TDLS8000, User Manual

Page: 173 / 320

<8. YH8000 HMI Unit>
8-22
IM 11Y01D01-01EN
Tag name
Shows the tag names assigned to each TDLS8000. Serial numbers are displayed if tag
names are not assigned.
Alarm icon
If an alarm is occurring on the TDLS8000, an alarm icon is displayed. If both a warning
and a fault are occurring, the fault icon is displayed.
HMI selection
To switch to the YH8000 configuration screen, select the HMI option.
8.7.3 Setting the Date and Time on the TDLS8000
If multiple TDLS8000s are connected, the following function can be used when setting the
TDLS8000 clocks.
• Change all analyzer
You can collectively set the clocks on all connected TDLS8000s.
• Time synchronization
You can synchronize the clocks of other connected TDLS8000s with the clock of the
TDLS8000 that you are currently configuring.
Configuration menu path:
“ >>[Analyzer]>>Configuration>>System>>Date&Time>>Operation”
NOTE
The collective setting of the clocks and synchronization of the clocks do not completely
synchronize the TDLS8000 clocks. Even when these functions are used, the clocks may be off
by a few seconds. The clocks may drift even further as time passes.
3rd Edition: Jun. 10, 2016-00