Vigia NM 253, Manual

Page: 5 / 28

3
USER’S MANUAL
ENGLISH
Functioning
Activation
The equipment
automatically turns on
when switching on the
ignition key and it turns off
when closing it.
40
160
60
80
100
120
140
BAR
PSI
PSI
PSI
40
160
60
80
100
120
140
PSI
PSI
PSI
ON OFF
ON OFF
However, you can turn the
equipment on and off by
pressing the button
for ± 4 seconds even with
the ignition key closed, but
it will not inflate the tires.
You could only see thre
pressures going into manual
mode.
40
160
60
80
100
120 140
PSI
PSI
PSI
40
160
60
80
100
120 140
PSI
PSI
PSI
ON
OFF
ON OFF
Visualization
The panel shows the pressures in sequential or
manual mode.
Sequential mode:
Each pressure is shown
automatically every 10 seconds, i.e. 10 seconds
pressure 1, then 10 seconds pressure 2, then 10
seconds pressure 3 and then it shows again pressure
1 and so on.
Manual mode: In case
40
160
60
80
100
120 140
PSI
PSI
PSI
40
160
60
80
100
120 140
PSI
PSI
PSI
3 SECONDS
you want to see just one
pressure constantly, it can
be configured manually
by pressing or
for 3 seconds.
Once configured in manual mode, pressures 1, 2, 3
or more can be seen and also the inlet pressure P by
pressing or .
To change to sequential mode, press or
for
3 seconds.
Explanation: In case there is a loss of pressure
(punctured tire) the panel will automatically change
to sequential mode to advice the driver about such situa-
tion.
Air loss
The control panel will indicate the air loss with a sound
signal:
Small air loss: 1 beep every 9 seconds.
Medium air loss: 2 beeps every 5 seconds.
Excessive air loss: 3 beeps every 2 seconds.
Important: Repair the air loss as soon as possible
or go to the nearest Official Service.