AGDS-32 User Manual
Vighnaharta Technologies Pvt. Ltd. Page
13
of
14
2.
RESET:
Press
Menu2
to “
Reset”
any individual detector. Then AGDS-32 panel will ask for zone number.
For example, if you enter zone 04: after entering zone number 04 then following message display,
Then,
Then entered zone will be reset.
3.
Reset All:
The
Reset All
key used to Reset the all Gas Detector. In Alarm condition, to reset all gas detectors
press
Reset All
key, all zones will reset. When this key pressed then all
Active Gas zones
will
reset.
Note:
To rest all active gas detectors, user need to first acknowledge alarm condition by pressing
Silence
key. Then only
Reset All
will work.
4.
Silence:
The “
Silence
key”
used to stop Siren when AGDS-32 panel is in Alarm Condition. If user wants to
stop the siren due to unknown trip then, user can use “
Silence key
”
5.
Test:
The “
Test
key”
used to test that Siren is working properly or not and when user press “
Test
key”
, then AGDS-32 panel turns ON the Siren
To stop the siren then use “
Silence Key”
ZONE CONFIG:
Zone No: 04
Resetting Device
