Vigan Mammoth Z6V1, User Manual

Page: 43 / 82

str
43
Usage of the trimming head without the guide comb
Pick suitable size of trimming head (no.1 or no.3). For detailing, you can use the trimming
head no.2.
1) Install suitable trimming head without the guide comb. Be very careful during trimming
without the comb, the trimmer will cut every hair that gets into the contact with.
2) When trimming the ear contours, tilt the trimmer so only on side of gets into the contact
with hairline.
3) When trimming the neck, turn the trimmer upside down (picture 15-16).
4) When trimming the beard, turn the trimmer upside down (picture 13-14).
Trimming the hair in ear and nose
Nose:
1) Make sure that the inside of your nose is clean.
2) Install the nose and ear hair trimming head (no.4).
3) Turn on the device and put the tip of the trimmer into your nose. Never put the tip into
your nose deeper than 6 mm!
4) Repeat slow circle moves until you reach the desired result. The easiest and fastest way of
trimming the nose hair is to copy the inner shape of your nostrils.
5) Turn off the trimmer and clean the head properly.
Ears:
1) First of all, clean your ears thoroughly.
2) Install the ear and nose hair trimmer.
3) Turn on the device and move the tip of the trimmer around your ear.
4) Carefully put the tip of the trimmer into your ear and proceed same as with the nose hair
trimming. Never put the tip into your nose deeper than 6 mm!
5) Turn off the device and clean the attachment carefully.