ViewZ VZ-CM-EB Installation Instructions Manual Download Page 3

Page: 3 / 10

Installation Instructions

Visit the ViewZ USA website at http://www.viewzusa.com

CM 308 series

This bracket is designed to mount a monitor from the ceiling structure. It can be used with the existing truss structure of the building

or in conjunction with a channel strut. There are four lengths of brackets available.

The following tools may be required depending on your installation.

•  Part #
•  Part #
•  Part #
•  Part #

VZ-CM308-B
VZ-CM308-W
VZ-CM-EW
VZ-CM-EB

Length of 3' to 8'
Length of 3' to 8'
Length of 3' to 5.2'

Optional Extension Pole Set

Length of 3' to 5.2'

Optional Extension Pole Set

Your ViewZ mount product is shipped with all proper installation hardware and components. If there are parts missing

and/or damaged, please stop the installation and contact ViewZ USA at (888)-998-4399.

Electronic Stud Finder

Monitor Hold Bracket (1 pc.)

Top Pole (1 pc.)

Wall/Ceiling Mount Bracket (1 pc.)

Middle Pole (1 pc.)

Monitor Hold Bracket (2 pc.)

Bottom Pole (1 pc.)

Protective Eye-wear

Pencil

Phillips Screwdriver

Level

Portable Drill / Bit

Socket Wrench

Assembly Components

Installation Tools

Telescopic Ceiling Mount Info

Summary of Contents for VZ-CM-EB











Search results

Summary of Contents for VZ-CM-EB

Reviews:

Related manuals for VZ-CM-EB

Brands by name

Popular brands

ViewZ VZ-CM-EB, Installation Instructions Manual

Search results

Summary of Contents for VZ-CM-EB

Reviews:

Related manuals for VZ-CM-EB

Brands by name

Popular brands