background image

4

User Manual

Visit the ViewZ USA website at https://www.viewzusa.com

The following image is the description of interface input & output ports of 1TRX extender.

Receiver (RX)

Transmitter (TX)

Interface Input Ports

CONNECT EXTERNAL EQUIPMENTS

q

r

u

a

w

t

i

s

e

y

o

d

1. 

Turn off all devices including your HDMI source and HDMI display.

2.  Connect your HDMI source to the 

Transmitter

's HDMI Input port with a HDMI cable (HDMI cable not included). 

Optional: Connect the 

IR Blaster Extension Cable

 to the 

Transmitter

's IR output port. Face the (IR Blaster) eye towards your 

HDMI source's IR window. This connection is needed if you want to control your HDMI source from the remote location.

3.  Plug your CAT5e/6/7 cable between the 

Transmitter

's RJ45 Output and 

Receiver

's RJ45 Input.

4.  Connect your monitor to the 

Receiver

's HDMI output port with a HDMI cable (HDMI cable not included). 

Optional: Connect the 

IR Receiver Extension Cable

 to the 

Receiver

's IR input port. This connection is needed if you want to 

control your HDMI source from the remote location.

5.  Plug the provided power adapters into the 

Transmitter

's and 

Receiver

's power jacks (DC 5V), then plug both power 

adapters into a reliable power source.

6.  Turn on all connected devices.
7.  The HDMI extender is ready for use.

1. 

RESET - Reset the receiver(RX)

2. 

RJ45 In -Connect to the transmitter(TX)'s RJ45 output 

port by using a CAT 5e/6/7 cable

3. 

LINK LED - Light up when RJ45 connected from TX. If 
flashing, RJ45 is not connected from TX

4.  DC5V - Connect to the provided power supply
5.  HDMI Out - Connect to the monitor
6.  IR In - Connect to the IR receiver (which provided)

Installation Process

7. 

RESET - Reset the transmitter(TX)

8.  RJ45 Out -Connect to the receiver(TX)'s RJ45 input  

port by using a CAT 5e/6/7 cable

9. 

LINK LED - Light up when HDMI input source is 

detected. If flas, no HDMI input source is detected

10.  DC5V - Connect to the provided power supply
11.  HDMI In - Connect to the HDMI source device
12.  IR Out - Connect to the IR blaster (which provided)

Summary of Contents for VZ-1TRX









Reviews: