11
User Manual
Visit the ViewZ USA website at https://www.viewzusa.com
VOLUME
37
CONTROL AND FUNCTION
Volume
Select Input Source - Monitor Button Function
Press
◄
/
►
buttons to adjust volume on monitor
Press
◄
/
►
buttons to adjust volume on remote controller
Auto Detect Source / No Signal / Out of Range Message
No Signal Message : If you did not connect any input source, monitor will show 'No Signal' message and go into stand-by mode.
Input Message : If you connect any input source, monitor will detect it automatically and identify it by the type of input
source it is - HDMI, DVI or VGA.
Out of Range Message: If you connect a specific input source that is out of range on panel frequency (ref. page #17), you will
see this message. In this case, please connect proper frequency input source.
Press 'SOURCE' button on monitor or 'HDMI / DVI / VGA' button on remote controller
Press
▲ / ▼
button to change input source and then press 'MENU' button to select input source on monitor
Press 'HDMI / DVI / VGA' button to select input source on remote controller
INPUT
VGA
DVI
HDMI
ATTENTION
No Signal
ATTENTION
OUT OF RANGE
INPUT
HDMI
