■
1
- Turn the main
jog
to make your choice, and click the jog to select
2
- Press the main jog on the front of the monitor for 2 seconds to enter or exit the menu
- Turn the jog to move around the menu
- Click the jog to make your selection
3
Factory default setting for programmable keys on the front of the monitor
▶
▶
First Steps
Selecting Input
Menu Control
When the monitor is powered on and connected to your source,
F3
Max Bright
F5
HDMI Output
F1
Blue/Mono
F2
Function key
I
nitia
l Se
tu
p
- To select your source, please press
SOURCE
button
-
Factory default is HDMI
. Please skip this step if you are connected to HDMI
source
- Main jog allows users to move one step at a time. If you wish to move back to previous step in the menu, press
the jog for two seconds. If you want to exit the menu and restart, press exit button depending on where you are in
menu tree
- Users can program 6 function buttons on the front by
MENU
Function Key
Function Key #
- If you click the jog without entering the main menu, brightness, contrast, color, and volume control will be
available. For an example, click the jog 2 times to control contrst and 4 times to change
volume
Aspect
SDI Output
H/V Delay
- All featuress in the monitor can be programmed in one of these six keys
F6
F4
VZ-070XXXXX
Initial Setup
7