C. FRONT & BACK KEY CONTROL
1. PIR(Passive Infra-Red) Sensor
Built-in PIR(Passive Infra-Red) Sensor for the Motion Detection function.
2. BUILT-IN CAMERA
Image of this camera is shown by AV1.
3. IR Sensor
Remote controller sensor.
4. POWER LED
The power LED lights with green when the power is turned ON.
The power is turned off by pressing the power switch again and the power LED goes to off.
5 & 6. VOL(+) & VOL(-)
Adjust the volume and menu settings.
7 & 8.
▲
&
▼
These buttons allow user to enter the sub-menu of the activated function.
The up(
▲
) button is HOLD function and stop the Motion Detection & Auto switching functions.
9. SOURCE/SELECT
Selects an input source.
Enters a submenu or accepts your selection in the OSD menu.
10. MENU/EXIT
Activates and exits the On Screen Display.
This button can also be used to move previous menu or status.
11. POWER ON/OFF(
/ I )
Turns the power ON or OFF. There will be a few seconds delay before the display appears.
8
………………………………………………………………………. INSTRUCTION MANUAL
5
6
7
8
9
11
2
3 4
1
10
