43
Network Camera User Manual
4. Set the schedule of the target counting by area. The setup steps of the schedule are the same
as schedule recording setup (See
5. View the statistical information in the live view interface.
6. View the statistical information of target counting by area. Click Statistics
Target
Counting by Area to enter the following interface.
Please select report type, count type and start time as needed. Then click “Count” to search
the statistic result. Click “Chart” to view the statistic result intuitively.
4.5.9
Face Detection
Face detection function is to detect the face appearing in the surveillance scene. Alarms will
be triggered when a face is detected.
The setting steps are as follows:
1.
Go to Config
Event
Face Detection as shown below.
