ViewSonic X10-4K User Manual Download Page 98

Page: 98 / 107

Indian Restriction of Hazardous Substances

Restriction on Hazardous Substances statement (India). This product complies

with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent

chromium, polybrominated biphenyls or polybrominated diphenyl ethers in

concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for

the exemptions set in Schedule 2 of the Rule.

Product Disposal at End of Product Life

ViewSonic® respects the environment and is committed to working and living

green. Thank you for being part of Smarter, Greener Computing. Please visit the

ViewSonic® website to learn more.

USA & Canada:

http://www.viewsonic.com/company/green/recycle-program/

Europe:

http://www.viewsoniceurope.com/eu/support/call-desk/

Taiwan:

https://recycle.epa.gov.tw/

Summary of Contents for X10-4K












































































































Search results

Summary of Contents for X10-4K

Reviews:

Brands by name

Popular brands

ViewSonic X10-4K, User Manual

Search results

Summary of Contents for X10-4K

Reviews:

Brands by name

Popular brands