![background image](http://html1.mh-extra.com/html/viewsonic/vx2025wm-1/vx2025wm-1_service-manual_1021500025.webp)
ViewSonic Corporation
Confidential - Do Not Copy
VX2025wm
-1
22
d) Internal OSD: Internal SRAM allows up to 2048 characters, with programmable OSD frame size.
Width is 64 columns, and Height is 32 row.
e) On chip TMDS receiver: The NT68563HF integrated TMDS receiver, which operates up to 165MHz
and can directly connect to all DVI compliant TMDS transmitters. The TMDS signals are connected
to NT68563HF as described bellow:
Pin Name
Pin NO.
TX0+
9
TX0-
8
TX1+
6
TX1-
5
TX2+
3
TX2-
2
TXC+
11
TXC-
12
6.1.2
Mcu flash ROM
This is an 8031 CPU core embedded micro-controller, which is design for high-performance low-cost LCD
monitor control application. It contains an 8-bit 8031 micro-controller, on-chip 64 K bytes flash-type
program ROM, 1,280-bytes internal data memory, four 7-bit resolution A/D Converter, 10-channel 8-bit
resolution PWM DAC, two 16-bit timer/counters, and a UART.
a) PWM controlling function (Pin 8, Pin 9): The MCU 68F633 has two GPIO to control audio volume and
back light brightness.
b) Serial interface ports pin 25~26(DVI) and pin 27~28(VGA): This serial interface ports communicate
with MCU and support up to 400Kbit per second transmit rate.
6.1.2
Power Regulator AIC1563 (U1), AIC1117 (U3, U4, U5): The AIC1563 is a monolithic control IC
containing the primary functions required for DC-to-DC converters. The device consists of an internal
temperature compensated reference, comparator, controlled duty cycle.
Oscillator with an active current sense circuit, desired output voltage are determined by the equation,
Volt = 1.25 *(1 + R121 / R122), in this case, the output voltage are 5 Volts
AIC1117 (U3, U4, U5): The AIC1117 is a low dropout positive adjustable regulator with minimum of 800mA
output current capability.
So it is well suited for 3.3 V and 2.5 V Regulator.
U5 as a 1.8V regulator, desired output voltage are determined by the equation
Volt=1.25 x (1 + R90/R88) = 1.8
U3 as a 3.3V regulator, desired output voltage are determined by the equation
Volt=1.255 x (1+ R86/R85) = 3.3
U4 as a 3.3V regulator, desired output voltage are determined by the equation
Volt=1.255 x (1+ R89/R87) = 3.3
Summary of Contents for VX2025wm-1
Page 49: ...ViewSonic Corporation Confidential Do Not Copy VX2025wm 1 46 ...
Page 59: ...ViewSonic Corporation Confidential Do Not Copy VX2025wm 1 56 11 PCB Layout Diagrams 11 1 ...
Page 60: ...ViewSonic Corporation Confidential Do Not Copy VX2025wm 1 57 11 2 ...
Page 61: ...ViewSonic Corporation Confidential Do Not Copy VX2025wm 1 58 11 3 ...