73
Controlling the Projector through a LAN Environment
The projector supports Crestron® software. With the correct settings in the LAN
Control Settings menu, you can manage the projector from a computer using a web
browser when the computer and projector are properly connected to the same
local area network.
CONTROL
N
A
L
RS-232
RJ45
RJ45
LAN
YPbPr
VGA IN
HDMI
Configuring the LAN Control Settings
If you are in an
Automatic
IP environment:
1.
Take a RJ45 cable and connect one end to the RJ45
Control
port of the projector,
and the other end to your network.
2.
Go to:
Setting
>
Network Settings
>
Wired LAN Control
.
3.
Select
Configure IP
and ensure it is set to
Automatic
.
4.
Wait for 15-20 seconds, then re-enter
LAN Settings
. Now, the projector’s
IP Address, Subnet Mask, Default Gateway, and DNS Server settings will be
displayed.
5.
Make note of the IP Address displayed in the Projector IP Address row.
NOTE:
•
If the Projector IP Address still does not appear, contact your network
administrator.
• If the RJ45 cables are not properly connected, the Projector IP Address,
Subnet Mask, Default Gateway, and DNS Server will display 0.0.0.0. Ensure
the cables are properly connected and try the above steps again.
• If you need to connect to the projector in its Standby Mode, set
Standby
LAN Control
to
On
in the
Network Settings
menu.
