manualshive.com logo in svg

ViewSonic VS17612, User Manual

Share
Download
ViewSonic VS17612 User Manual Download Page 79

79

79

3. 

To return to a previous menu press the 

Return

 button.

Menu

Description

Power On Source

Allows the user to enter the desired source directly 

after turning on the projector.

Power On/Off Ring Tone Enable or disable the power on/off ring tone.

Auto Power On

Direct Power On

Turn on the projector automatically once plugged 

into an outlet.

CEC

This projector supports CEC (Consumer Electronics 

Control) function for synchronized power on/off 

operation via HDMI connection. That is, if a device 

that also supports CEC function is connected to the 

HDMI input of the projector, when the projector’s 

power is turned off, the power of the connected 

device will also be turned off automatically. When 

the power of the connected deice is turned on, the 

projector’s power will be turned on automatically.

NOTE: 

 

Ensure both the projector’s and the 

connected device’s CEC function are 

turned on.

Summary of Contents for VS17612












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands