
33
ViewSonic Corporation
Confidential - Do Not Copy
VX2255wmh-4
VX2255wmb-4
5.3.3 Power lock Menu function
Power Lock Menu Function Check
Item
Method
Phenomenon
Activate Power Lock
[1] + [
▼
] 10S
Can not turn off the LCD;
Press the power button will
appear "Power Button
Locked" OSD 3s;
LCD would automatically turn
back "On" when power is
restored after a power failure
Deactivate Power Lock
[1] + [
▼
] 10S(again)
NOTICE:
Status bar indicating Power Button lock or unlock is in progress and when complete it will indicate
“Power Button Locked”
Power should only be lockable in the “On State”
5.3.4 Resolution notice function
Resolution Notice Menu
Item
Method
Phenomenon
Activate
Resolution Notice Menu
Resolution Notice OSD should show
on screen after changing to
non-native mode for 30 sec,
And it should disappear after 10s
or by pushing button [1] or [2]
------
Deactivate
Resolution Notice Menu
Push button [2] under Resolution
Notice OSD, select Disable
-------
5.3.5 Factory Mode Introduction
When input the signal, press “power key” to turn off the monitor. Press”
[2] +[ ]
“at the same time so as to
enter factory mode. After power on, press ‘’Menu[1]’’ key, you can see the Factory menu.
INL
MT220WW01
: Currently using panel model name
V2 070328
: Currently using firmware version information.
Auto Color
: Automatically calibrate chip ADC parameter by using chip internal DAC
Color Temperature : The R, G, B of 9300K and 7500K and 6500K and 5400K and User Mode
Colors are all generated from scaling back end.
Burn-in pattern
If it is a new monitor, and in factory mode, if no VGA signal input, Burn-in pattern will self generate
automatically. Burn in patterns are: full Red, Green, Blue, White and Black. You can not escape from
Burn-in pattern until plug in VGA Cable or press the power key to turn the monitor off and then turn
it on.
Downloaded from
www.Manualslib.com
manuals search engine