![background image](http://html.mh-extra.com/html/viewsonic/vp920-1/vp920-1_service-manual_1021413013.webp)
Do the following to adjust the display setting:
1.
To display the Main Menu, press button [1].
NOTE:
All OSD menus and adjustment screens disappear automatically after about 15
seconds. This is adjustable through the OSD timeout setting in the setup menu.
2.
To select a control to adjust, press
S
or
T
to scroll up or down in the Main Menu.
3.
After the desired control is selected, press button [2]. A control screen like the one shown
below appears.
4.
To adjust the setting, press the up
S
or down
T
buttons.
5.
To save the adjustments and exit the menu, press button [1]
twice
.
The following tips may help you optimize your display:
• Adjust the computer's graphics card so that it outputs a 1280 x 1024 @ 60Hz video signal
to the LCD display. (Look for instructions on “changing the refresh rate” in the graphics
card's user guide.)
• If necessary, make small adjustments using H. POSITION and V. POSITION until the
screen image is completely visible. (The black border around the edge of the screen should
barely touch the illuminated “active area” of the LCD display.)
ViewSonic Corporation
Confidential – Do Not Copy
VP920-1_VP920b-1
10
Summary of Contents for VP920-1
Page 77: ...ViewSonic Corporation Confidential Do Not Copy VP920 1_VP920b 1 74 ...
Page 90: ...11 2 MAIN PCB BOTTOM VIEW ViewSonic Corporation Confidential Do Not Copy VP920 1_VP920b 1 87 ...
Page 92: ...11 5 POWER PCB TOP VIEW ViewSonic Corporation Confidential Do Not Copy VP920 1_VP920b 1 89 ...
Page 93: ...11 6 POWER PCB BOTTOM VIEW ViewSonic Corporation Confidential Do Not Copy VP920 1_VP920b 1 90 ...