5.2.2 Video alignment.
5.2.2.1 Initial Conditions
5.2.2.1.1 Set the contrast to 70%
and set brightness to 100%..
5.2.2.1.2 Input a 640x480 / 60Hz 5-block (5-MOSAIC) pattern (input level 100IRE
0.7Vp-p), then adjust the white balance.
SRBG/9300K / 6500K / 5400K / 5000K, R G B Gain preset as below:
sRGB 9300K 6500K 5400K 5000K
Analog DVI Analog DVI
Analog
DVI
Analog
DVI Analog DVI
R
Gain
255 255 255 255 255 255 255 255 255 255
G
Gain
255 255 255 255 255 255 255 255 255 255
B
Gain
255 255 255 255 255 255 255 255 255 255
5.2.2.2 9300K
alignment:
5.2.2.2.1 Input 1600x1200 / 60Hz & full white pattern at 100IRE.
5.2.2.2.2 Adjust R, G, and B Gain to meet following chromaticity spec:
9300K
→
x = 0.283 ± 0.005, y = 0.298 ± 0.005, Y > 150cd/m
2
(Both analog & DVI).
5.2.2.3 6500K alignment:
5.2.2.3.1 Input 1600x1200 / 60Hz & full white pattern at 100IRE.
5.2.2.3.2 Adjust R, G and B Gain to meet following chromaticity spec:
6500°K
→
x = 0.313 ±0.005, y = 0.329 ± 0.005, Y > 200cd/m
2
(Both analog & DVI).
5.2.2.4 5400K
alignment:
5.2.2.4.1 Input 1600x1200 / 60Hz & full white pattern at 100IRE.
5.2.2.4.2 Adjust R, G, and B Gain to meet following chromaticity spec:
5400K
→
x = 0.335 ± 0.005, y = 0.350 ± 0.005, Y > 180cd/m
2
(Both analog & DVI).
5.2.2.5 5000K
alignment:
5.2.2.5.1 Input 1600x1200 / 60Hz & full white pattern at 100IRE.
5.2.2.5.2 Adjust R, G and B Gain to meet following chromaticity spec:
5000°K
→
x = 0.346 ±0.005, y = 0.359 ± 0.005, Y > 180cd/m
2
(Both analog & DVI).
5.2.2.6 sRGB
alignment:
5.2.2.6.1 Input 1600x1200 / 60Hz & full white pattern at 100IRE.
5.2.2.6.2 Adjust R, G and B Gain to meet following chromaticity spec:
sRGB
→
x = 0.313 ±0.005, y = 0.329 ± 0.005, Y > 200cd/m
2
(Both analog & DVI).
5.2.2.7 64 grays and 16 grays pattern check:
5.2.2.7.1 Input a 1600x1200 / 60Hz, 64 gray-level pattern at 100IRE, with brightness set to 100%
and
contrast
set
to
70%.
5.2.2.7.2 Verify that under the 9300K / 6500K / 5400K / 5000K settings, no more than 2 of the 64
grays
are
saturated.
5.2.2.7.3 Input a 1600x1200 / 60Hz, 16 gray-level pattern at 100IRE, with brightness set to 100%
and
contrast
set
to
100%
5.2.2.7.4 Verify that under the 9300K / 6500K / 5400K / 5000K settings, no more than 4 of the 16
grays are saturated.
21
ViewSonic
Corporation
Co
nfidential
-
Do
Not
Copy
VP201b/s-1
Summary of Contents for VLCDS26064-2W
