ViewSonic
ViewMate
TM
Wireless Optical Mouse MW407
7
1. Remove any existing mouse drivers completely.
2. Insert the driver CD-ROM to your computer.
3. Please open the folder “Mouse” and double click the file “Setup.exe” to complete the driver
installation.
4. Restart the computer.
5. A Mouse Setting icon will appear on the task bar of Windows after you successfully finish the
installation.
6. Double click the Mouse Setting icon and then follow the instructions of the selection items to
set the mouse properties.
7. The functions of the 4
th
and 5
th
mouse buttons must be enable and set through the Mouse
Setting application. Please do not select the function “System Default” for the 4
th
and 5
th
buttons.
8. Introduction of the Office Application Software: You can simply apply the Office application
functions through the one-touch hot key on the top of the Office mouse.
Mouse Charge Mode
Note:
- Please skip this section if your mouse is not rechargeable.
- Please use rechargeable batteries for the chargeable mouse.
- At the first time of usage, please charge the AAA batteries at least 6 to 8 hours and 10
to 12 hours for the AA batteries.
• Charge by Receiver: The receiver must be connected with the required AC to DC adapter in
advance and then place the mouse on the receiver precisely.
• Please charge the batteries by placing the rechargeable batteries into the cradle and then closing
the cradle’s cover. AA or AAA rechargeable batteries are compatible with the chargeable cradle.
• You may directly charge the batteries with the mouse by opening the cradle’s cover and then
placing the mouse on the cradle.
• The LED indicator on the receiver will light while the mouse is low battery. Please recharge or
change the batteries immediately.
• Press any button to wake up the mouse while the mouse is in the sleeping mode.
Notification
• The optical technology can precisely detect the mouse motion on most surfaces. Please avoid
using the optical mouse on any reflective, transparent, metallic or complex-pattern surface.
• Recommendation: please do not use the mouse during charge periods.
• The low-battery indicator next the scroll wheel of the mouse will light while the mouse is low
battery. Please recharge or change the batteries immediately.
• If the product is malfunction, please change or recharge the batteries, or move the receiver away
from the computer and the monitor at least 20 cm.
• If the mouse does not work properly, please make sure the PS/2 or the USB port of the computer
is valid. Besides, check the connector or the cable of the receiver if there is broken or tangled.
• Please avoid using the mouse under direct sunlight, extreme hot, cold or dusty environment.
