![background image](http://html1.mh-extra.com/html/viewsonic/vg700b/vg700b_service-manual_1021199038.webp)
VG700b Series Service Manual
7-4
VG700b series
4. Firmware Programming
Notice:1.) The screen will become no video, but the power LED will twinkle. When the power
LED stops, it means program complete. You have no way to wake up screen, you
should unplug power cord, and replug it. Press Power the screen will wake up.
2.) Or you can use data transfer switch switch to another monitor when firmware
programming. You will see the program rate of progress below the screen when
the program rate of progress until 100%, it means firmware upgrade procedure
is completed.
3.) Get intoBurn In Mode(Ref.6-2), press any buttons besides Power button to
check the firmware version if it is correct.
5. Unplug Power Cord and plug it again.
6. After finish Firmware upgrade, you should do All Mode Reset.
(Ref.6-2),
7. Check Firmware version.
ViewSonic Corporation
Confidential
– Do Not Copy
VG700b