background image

Do the following to adjust the screen image:

1

To display the Main Menu, press button [1]. 

2

To highlight a control you want to adjust, press 

or

 to scroll up or down

the Main Menu.

3

To select the highlighted control, press button [2]. A control screen appears.

4

To adjust the control, press the up

or down

buttons.

5

To save the adjustments and exit the menu, press button [1]

twice

.

The following tips may help you optimize your display:

• Adjust your computer's graphic card so that it outputs a video signal 1024 x 

768 @ 60 Hz to the 

LCD display

. (Look for instructions on “changing

the refresh rate” in your graphic card's user guide.)

• If necessary, make small adjustments using H POSITION and V POSITION 

until the screen image is completely visible. (The black border around the 
edge of the screen should barely touch the illuminated “active area” of the 

LCD display

.)

The line at the bottom of the 
screen tells you what you can 
do next: Exit this menu or 
Select the control that is 
highlighted.

ViewSonic Corporation 

11

 Confidential 

– Do Not Copy

V

G500-2

Summary of Contents for VG500-2

























































Reviews: