![background image](http://html1.mh-extra.com/html/viewsonic/ve720m-1/ve720m-1_service-manual_1021046013.webp)
10
Memory Recall Actions
Memory Recall action on the analog and digital mode as below
1. Recall white balance to factory setting
2. Set the factory defaults as shown in Section 4-8
3. Clean all the mode setting buffer
4. Execute Auto Image Adjust
Note: Memory Recall should have no effect for Language, Power Lock, User Color Settings or Input Priority
Resolution Notice Actions
1.
Resolution Notice OSD should show on screen after changing to non-native mode for 30 sec
2.
The OSD should disappear after 10 sec or by pushing button [1] or [2]
Resolution Notice function should be disabled when push button [2] under Resolution Notice OSD
0-Touch™ Function Actions
1. Execute Auto Image Adjust when new mode detected, and save the settings to buffer for further use
2. It should be reset by Memory Recall function
(Should not reset by power off, power unplug and others)
OSD Auto Save
The OSD shall save new settings when it is turned off by the user or when it times out. There shall not be a separate save
AUDIO INTERFACE (SPEAKER SPECIFICATION)
Line input connection
3.5 mm stereo jack
Line input signal
1.0 Vrms
Line input impedance
10 k Ohm
Maximum power output (Electric)
1 W @ < 8% DISTORTION
Signal to Noise Ratio
72 dB
Frequency response
500 Hz – 20 Khz
Distortion
< 8 % THD (@1kHz)
Vibration
There should be no audible vibration with volume at 100%. (Input
signal within 1 Vrms)
Screen image
There should be no affect on the screen image stability under any
conditions
Connector PC99 requirement Audio in
Lime Green pantone # 577C
Cable type / length
3.5mm stereo cable / 1.8m length
Audio DPMS
NOTE: THERE IS NO GUARANTEE <1
W POWER
CONSUMPTION IN ACTIVE OFF MODE, WHEN THE AUDIO
CABLE IS CONNECTED
ViewSonic Corporation
Confidential - Do Not Copy
VE720m-1_VE720mb-1