. (The black border around the
edge of the screen should barely touch the illuminated “active area” of the
LCD dislay
.)
Main Menu
1:EXIT 2:SELECT
Auto Adjust
Contrast/Brightness
Color Adjust
Information
Image Adjust
Setup Menu
Memory Recall
AUTO
SET
i
?
Do the following to adjust the screen image:
1
To display the Main Menu, press button [1].
4
To adjust the control, press the up
I
or down
J
buttons.
5
To save the adjustments and exit the menu, press button [1]
twice
.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1280 x
1024 @ 60 Hz to the
LCD dislay
. (Look for instructions on “changing the
refresh rate” in your graphic card's user guide.)
• If necessary, make small adjustments using H. POSITION and V. POSITION
until the screen image is completely visible
Contrast
1:EXIT 2: Brightness
ViewSonic
Corporation
Co
nfidential
-
Do
Not
Copy
VE710b/s-1
9
NOTE:
All OnView menus and adjustment screens disappear automatically after about
15
seconds. This is adjustable through the OSD timeout setting in the setup menu.
2.
To select a control to be adjusted, press
S
or
T
to scroll up or down in the Main Menu.
3.
After the desired control is selected,
press button [2]. A control screen like the one shown below
appears.
The line at the bottom of the screen shows the
current functions of buttons 1 and 2:
Exit or select
the
Brightness control.