. (The black border around the
edge of the screen should barely touch the illuminated “active area” of the
LCD display.)
The line at the
bottom of the
screen tells you
what you can do
next: Exit or Select
the control that is
highlighted.
Main Menu
1:EXIT 2:SELECT
Auto Adjust
Contrast/Brightness
Color Adjust
Information
Image Adjust
Setup Menu
Memory Recall
AUTO
SET
i
?
Do the following to adjust the screen image:
.
To display the Main Menu, press button [1].
To adjust the control, press the up
I
or down
J
buttons.
To save the adjustments and exit the menu, press button [1]
twice
.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1024 x
768 @ 60 Hz to the LCD display. (Look for instructions on “changing the
refresh rate” in your graphic card's user guide.)
• If necessary, make small adjustments using H. POSITION and V. POSITION
until the screen image is completely visible
NOTE:
All OnView menus and adjustment screens disappear automatically
after about
15
seconds. This time period is adjustable through the Setup
menu and the OSD timeout control described on page 11.
To select the highlighted control, press button [2]. A control screen appears
like the example shown below.
Contrast
1:EXIT 2: Brightness
To highlight a control you want to adjust, press
I
or
J
to scroll up or down
the Main Menu.
.
.
..
6
ViewSonic
Corporation
Co
nfidential
-
Do
Not
Copy
VA
521
VE510b/s-2
Summary of Contents for ve510b/s-21
Page 55: ...11 2 MAIN PCB BOTTOM VIEW 52 ViewSonic Corporation Confidential Do Not Copy VA521 VE510b s 2 ...
Page 57: ...11 5 POWER PCB TOP VIEW 54 ViewSonic Corporation Confidential Do Not Copy VA521 VE510b s 2 ...
Page 58: ...11 6 POWER PCB BOTTOM VIEW 55 ViewSonic Corporation Confidential Do Not Copy VA521 VE510b s 2 ...