21
Network
NOTE:
The Camera IP address, by default, is set as
Fixed IP address
. Once you
follow the below steps to connect to the camera, you can adjust the
setting to
Dynamic IP
address
and let your Router/DHCP server assign
the network setting to the camera automatically.
Get the Camera’s IP Address
The camera’s factory default IP address is
192.168.100.88
.
To check this IP address, you can use the remote control to open the menu and find
the intranet setting in the
INFORMATION
page.
Connect to a Computer
LAN
LAN
1
2
Connect the camera to a computer via a network cable directly.
1.
Connect one end of a CAT5/5e/6 network cable to the camera.
2.
Connect the other end of the network cable to the Ethernet interface of the
computer (LAN port).
3.
Connect the camera to a power supply.
4.
Configure the computer network setting to the IP address
192.168.100.2
and
subnet mask setting to
255.255.255.0
.
