Appendix C : Use ISP to program MCU
3.1 Select MTV type first , load the binary or intel hex file that you want to program into the MCU , and select
“ AUTO” item , then press “ RUN “ button , see fig3.1
Fig. 3.1
3.2 If user change the MTV type , it must load file again , or the buffer of load file will be cleared .
3.3 CRC ( cyclic redundancy check ) : the host can check CRC register’s result instead of reading every byte in
flash .
The message of
Check MCU CRC OK
means that the host verify OK for the progress of program , see
Fig.3.2
Fig. 3.2
46
ViewSonic
Corporation
Co
nfidential
-
Do
Not
Copy
VA912-4_VA912b-4
