ViewSonic
VA903m/VA903b/VA903mb
10
Do the following to adjust the display setting:
1.
To display the Main Menu, press button [1].
NOTE:
All OSD menus and adjustment screens disappear automatically after about 15
seconds. This is adjustable through the OSD timeout setting in the setup menu.
2.
To select a control to adjust, press
S
or
T
to scroll up or down in the Main Menu.
3.
After the desired control is selected, press button [2]. A control screen like the one shown
below appears.
4.
To adjust the control, press the up
S
or down
T
buttons.
5.
To save the adjustments and exit the menu, press button [1]
twice
.
The following tips may help you optimize your display:
• Adjust the computer's graphics card so that it outputs a 1280 x 1024 @ 60Hz video signal to
the LCD display. (Look for instructions on “changing the refresh rate” in the graphics card's
user guide.)
• If necessary, make small adjustments using H. POSITION and V. POSITION until the
screen image is completely visible. (The black border around the edge of the screen should
barely touch the illuminated “active area” of the LCD display.)
VA903m/VA903mb
VA903b
The line at the bottom of the screen shows
the current functions of buttons 1 and 2:
Exit or select the Brightness control.
Summary of Contents for VA903B - 19" LCD Monitor
Page 25: ......
