![background image](http://html1.mh-extra.com/html/viewsonic/va721-2/va721-2_service-manual_1020970043.webp)
9.
Use ISP to program MCU
9.1 Select MTV type first , load the binary or intel hex file that you want to program into the MCU , and select
“ AUTO” item , then press “ RUN “ button , see fig3.1
9.2 If user change the MTV type , it must load file again , or the buffer of load file will be cleared .
9.3 CRC ( cyclic redundancy check ) : the host can check CRC register ’s result instead of reading every byte in
flash . The message of
Check MCU CRC OK
means that the host verify OK for the progress of program .
ViewSonic Corporation
Confidential - Do Not Copy VA721-2
40