10
Initial Setup
Installing the Stand
1.
Remove the display, the stand’s neck and base, and the four (4) included screws
from the box. Also, prepare one (1) Phillips-head screwdriver.
2.
Place the display on a flat, stable surface with the screen facing down.
3.
Align the monitor stand’s neck with the stand mounting slots on the rear of the
display. Use the four (4) included screws to attach the monitor stand’s neck to the
display.
3
4
2
1
4.
Align and connect the points on the monitor stand’s base with the monitor
stand’s neck. Use the captured screw in the stand’s base and secure it to the
stand’s neck.
3
4
2
1