background image

iv

Important Safety Instructions

1. 

Read these instructions completely before using the equipment.

2. 

Keep these instructions in a safe place.

3. 

Heed all warnings.

4. 

Follow all instructions.

5. 

Do not use this equipment near water. Warning: To reduce the risk of fire or 

electric shock, do not expose this apparatus to rain or moisture.

6. 

Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the 

Display” in this guide for further instructions.

7. 

Do not block any ventilation openings. Install the equipment in accordance with 

the manufacturer’s instructions.

8. 

Do not install near any heat sources such as radiators, heat registers, stoves, or 

other devices (including amplifiers) that produce heat.

9. 

Do not attempt to circumvent the safety provisions of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than the other. A 

grounding type plug has two blades and a third grounding prong. The wide blade 

and the third prong are provided for your safety. If the plug does not fit into your 

outlet, consult an electrician for replacement of the outlet.

10. 

Protect the power cord from being tread upon or pinched, particularly at the plug, 

and the point where if emerges from the equipment. Be sure that the power outlet 

is located near the equipment so that it is easily accessible.

11. 

Only use attachments/accessories specified by the manufacturer.

12. 

Use only with the cart, stand, tripod, bracket, or table specified by 

the manufacturer, or sold with the equipment. When a cart is used, 

use caution when moving the cart/equipment combination to avoid 

injury from tipping over.

13. 

Unplug this equipment when it will be unused for long periods of time.

14. 

Refer all servicing to qualified service personnel. Service is required when the 

unit has been damaged in any way, such as: if the power-supply cord or plug is 

damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed 

to rain or moisture, or if the unit does not operate normally or has been dropped.

15. 

Moisture may appear on the screen due to environmental changes. However, it 

will disappear after a few minutes.

Summary of Contents for TD2420-2-CN



























Reviews: